ucc2808a-2q1

正在供货

产品详情

vin (max) (v) 14 operating temperature range (°c) -40 to 125 control mode current topology push pull rating automotive features soft start duty cycle (max) (%) 50
vin (max) (v) 14 operating temperature range (°c) -40 to 125 control mode current topology push pull rating automotive features soft start duty cycle (max) (%) 50
8 29.4 mm² 4.9 x 6
  • qualified for automotive applications
  • esd protection exceeds 1500 v per mil-std-883, method 3015; exceeds 200 v
    using machine model (c = 200 pf, r = 0)
  • dual output drive stages in push-pull configuration
  • current sense discharge transistor to improve dynamic response
  • 130-µa typical starting current
  • 1-ma typical run current
  • operation to 1 mhz
  • internal soft start
  • on-chip error amplifier with 2-mhz gain bandwidth product
  • on chip vdd clamping
  • output drive stages capable of 500-ma peak-source current,
    1-a peak-sink current

  • qualified for automotive applications
  • esd protection exceeds 1500 v per mil-std-883, method 3015; exceeds 200 v
    using machine model (c = 200 pf, r = 0)
  • dual output drive stages in push-pull configuration
  • current sense discharge transistor to improve dynamic response
  • 130-µa typical starting current
  • 1-ma typical run current
  • operation to 1 mhz
  • internal soft start
  • on-chip error amplifier with 2-mhz gain bandwidth product
  • on chip vdd clamping
  • output drive stages capable of 500-ma peak-source current,
    1-a peak-sink current

the ucc2808a-xq1 is a family of bicmos push-pull, high-speed, low-power, pulse-width modulators. the ucc2808a-xq1 contains all of the control and drive circuitry required for off-line or dc-to-dc fixed frequency current-mode switching power supplies with minimal external parts count.

the ucc2808a-xq1 dual output drive stages are arranged in a push-pull configuration. both outputs switch at half the oscillator frequency using a toggle flip-flop. the dead time between the two outputs is typically 60 ns to 200 ns depending on the values of the timing capacitor and resistors, thus limiting each output stage duty cycle to less than 50%.

the ucc2808a-xq1 family offers a variety of package options and choice of undervoltage lockout levels. the family has uvlo thresholds and hysteresis options for off-line and battery powered systems. thresholds are shown in the ordering information table.

the ucc2808a-xq1 is an enhanced version of the ucc2808 family. the significant difference is that the a versions feature an internal discharge transistor from the cs pin to ground, which is activated each clock cycle during the oscillator dead time. the feature discharges any filter capacitance on the cs pin during each cycle and helps minimize filter capacitor values and current sense delay.

the ucc2808a-xq1 is a family of bicmos push-pull, high-speed, low-power, pulse-width modulators. the ucc2808a-xq1 contains all of the control and drive circuitry required for off-line or dc-to-dc fixed frequency current-mode switching power supplies with minimal external parts count.

the ucc2808a-xq1 dual output drive stages are arranged in a push-pull configuration. both outputs switch at half the oscillator frequency using a toggle flip-flop. the dead time between the two outputs is typically 60 ns to 200 ns depending on the values of the timing capacitor and resistors, thus limiting each output stage duty cycle to less than 50%.

the ucc2808a-xq1 family offers a variety of package options and choice of undervoltage lockout levels. the family has uvlo thresholds and hysteresis options for off-line and battery powered systems. thresholds are shown in the ordering information table.

the ucc2808a-xq1 is an enhanced version of the ucc2808 family. the significant difference is that the a versions feature an internal discharge transistor from the cs pin to ground, which is activated each clock cycle during the oscillator dead time. the feature discharges any filter capacitance on the cs pin during each cycle and helps minimize filter capacitor values and current sense delay.

下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new
功能与比较器件相同且具有相同引脚
正在供货 汽车类 8.3v 至 15v、1a 推挽式电流模式 pwm 控制器 this product has higher uvlo

技术文档

star =有关此产品的 ti 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 3
类型 标题 下载最新的英语版本 日期
* 数据表 2012年 7月 12日
功能安全信息 | 2020年 9月 1日
技术文章 | 2017年 12月 27日

设计和开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

封装 引脚 cad 符号、封装和 3d 模型
8

订购和质量

包含信息:
  • rohs
  • reach
  • 器件标识
  • 引脚镀层/焊球材料
  • msl 等级/回流焊峰值温度
  • mtbf/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息:
  • 制造厂地点
  • 封装厂地点

支持和培训

可获得 ti 工程师和记娱乐手机app的技术支持的 ti e2e™ 论坛

所有内容均由 ti 和社区贡献者按“原样”提供,并不构成 ti 规范。请参阅。

如果您对质量、包装或订购 ti 产品有疑问,请参阅 。​​​​​​​​​​​​​​

视频系列

视频