可提供此产品的更新版本

open-in-new
功能与比较器件相同但引脚有所不同
预发布 具有 118db 动态范围的硬件控制、低功耗、高性能立体声音频 adc similar performance, lower power, smaller 4x4mm qfn package

产品详情

number of adc channels 2 analog inputs 2 digital audio interface dsd, i2s, l, tdm control interface h/w sampling rate (max) (khz) 216 adc snr (typ) (db) 124 rating catalog analog outputs 0 operating temperature range (°c) -40 to 85
number of adc channels 2 analog inputs 2 digital audio interface dsd, i2s, l, tdm control interface h/w sampling rate (max) (khz) 216 adc snr (typ) (db) 124 rating catalog analog outputs 0 operating temperature range (°c) -40 to 85
48 81 mm² 9 x 9
  • supports linear pcm, 1-bit direct stream digital (dsd), and multi-bit modulator output data
    • supports pcm output sampling rates from 8khz to 216khz
    • choose from 64x or 128x oversampled output rates for dsd
  • differential voltage inputs
  • on-chip voltage reference improves power supply noise rejection
  • dynamic performance: multi-bit modulator output with 6.144mhz modulator clock
    • 6-bit modulator data
    • dynamic range (-60db input, a-weighted): 124db typical
    • dynamic range (-60db input, 20khz bandwidth): 122db typical
    • total harmonic distortion noise (-1db input, 20khz bandwidth): -108db typical
  • dynamic performance: pcm output with 24-bit word length
    • dynamic range (-60db input, a-weighted): 123db typical
    • dynamic range (-60db input, 20khz bandwidth): 121db typical
    • total harmonic distortion noise (-1db input, 20khz bandwidth): -108db typical
  • dynamic performance: dsd output with 5.6448mhz bit rate
    • dynamic range (-60db input, 20khz bandwidth): 121db typical
    • total harmonic distortion noise (-1db input, 20khz bandwidth): -108db typical
  • low power dissipation:
    • 305mw typical for 48khz sampling rate
    • 330mw typical for 96khz sampling rate
    • 340mw typical for 192khz sampling rate
  • linear phase digital decimation filtering
    • select from classic or low group delay filter responses
  • digital high-pass filtering removes dc offset
    • left and right channel filters may be disabled independently
  • pcm audio serial port interface
    • master or slave mode operation
    • supports left-justified, i2s, and tdm data formats
  • pcm output word length reduction
  • overflow indicators for the left and right channels
  • analog power supply: 4.0v nominal
  • digital power supply: 3.3v nominal
  • power-down mode: 4mw typical
  • package: tqfp-48, rohs compliant
  • applications
    • digital audio recorders and mixing desks
    • digital live sound consoles
    • digital audio effects processors
    • surround sound encoders
    • broadcast studio equipment
    • audio test and measurement
    • sonar systems
    • high-performance data acquisition

windows is a registered trademark of microsoft.
i2s is a trademark of nxp semiconductors.
all other trademarks are the property of their respective owners.

  • supports linear pcm, 1-bit direct stream digital (dsd), and multi-bit modulator output data
    • supports pcm output sampling rates from 8khz to 216khz
    • choose from 64x or 128x oversampled output rates for dsd
  • differential voltage inputs
  • on-chip voltage reference improves power supply noise rejection
  • dynamic performance: multi-bit modulator output with 6.144mhz modulator clock
    • 6-bit modulator data
    • dynamic range (-60db input, a-weighted): 124db typical
    • dynamic range (-60db input, 20khz bandwidth): 122db typical
    • total harmonic distortion noise (-1db input, 20khz bandwidth): -108db typical
  • dynamic performance: pcm output with 24-bit word length
    • dynamic range (-60db input, a-weighted): 123db typical
    • dynamic range (-60db input, 20khz bandwidth): 121db typical
    • total harmonic distortion noise (-1db input, 20khz bandwidth): -108db typical
  • dynamic performance: dsd output with 5.6448mhz bit rate
    • dynamic range (-60db input, 20khz bandwidth): 121db typical
    • total harmonic distortion noise (-1db input, 20khz bandwidth): -108db typical
  • low power dissipation:
    • 305mw typical for 48khz sampling rate
    • 330mw typical for 96khz sampling rate
    • 340mw typical for 192khz sampling rate
  • linear phase digital decimation filtering
    • select from classic or low group delay filter responses
  • digital high-pass filtering removes dc offset
    • left and right channel filters may be disabled independently
  • pcm audio serial port interface
    • master or slave mode operation
    • supports left-justified, i2s, and tdm data formats
  • pcm output word length reduction
  • overflow indicators for the left and right channels
  • analog power supply: 4.0v nominal
  • digital power supply: 3.3v nominal
  • power-down mode: 4mw typical
  • package: tqfp-48, rohs compliant
  • applications
    • digital audio recorders and mixing desks
    • digital live sound consoles
    • digital audio effects processors
    • surround sound encoders
    • broadcast studio equipment
    • audio test and measurement
    • sonar systems
    • high-performance data acquisition

windows is a registered trademark of microsoft.
i2s is a trademark of nxp semiconductors.
all other trademarks are the property of their respective owners.

the pcm4222 is a high-performance, two-channel analog-to-digital (a/d) converter designed for use in professional audio applications. offering outstanding dynamic performance, the pcm4222 supports 24-bit linear pcm, 1-bit direct stream digital (dsd), and 6-bit modulator data outputs. the supported output formats make the pcm4222 ideal for digital audio recording and processing applications. the multi-bit modulator output adds versatility, allowing customers to design their own digital decimation filter and processing hardware. the on-chip, linear phase decimation filtering engine supports classic and low group delay filter responses, allowing optimization for either studio or live sound applications.

the pcm4222 includes three pcm sampling modes, supporting output sampling rates from 8khz to 216khz. the dsd output supports either 64x or 128x oversampled bit rates. the pcm4222 is configured using dedicated control pins for selection of output modes, pcm audio data formats and word length, decimation filter response, high-pass filter disable, and reset/power-down functions.

while providing uncompromising performance, the pcm4222 addresses power concerns with just over 300mw typical total power dissipation, making the device suitable for multi-channel audio systems. the pcm4222 is typically powered from a 4.0v analog supply and a 3.3v digital supply. the digital i/o is logic-level compatible with common digital signal processors, digital interface transmitters, and programmable logic devices. the pcm4222 is available in a tqfp-48 package, which is rohs-compliant.

the pcm4222 is a high-performance, two-channel analog-to-digital (a/d) converter designed for use in professional audio applications. offering outstanding dynamic performance, the pcm4222 supports 24-bit linear pcm, 1-bit direct stream digital (dsd), and 6-bit modulator data outputs. the supported output formats make the pcm4222 ideal for digital audio recording and processing applications. the multi-bit modulator output adds versatility, allowing customers to design their own digital decimation filter and processing hardware. the on-chip, linear phase decimation filtering engine supports classic and low group delay filter responses, allowing optimization for either studio or live sound applications.

the pcm4222 includes three pcm sampling modes, supporting output sampling rates from 8khz to 216khz. the dsd output supports either 64x or 128x oversampled bit rates. the pcm4222 is configured using dedicated control pins for selection of output modes, pcm audio data formats and word length, decimation filter response, high-pass filter disable, and reset/power-down functions.

while providing uncompromising performance, the pcm4222 addresses power concerns with just over 300mw typical total power dissipation, making the device suitable for multi-channel audio systems. the pcm4222 is typically powered from a 4.0v analog supply and a 3.3v digital supply. the digital i/o is logic-level compatible with common digital signal processors, digital interface transmitters, and programmable logic devices. the pcm4222 is available in a tqfp-48 package, which is rohs-compliant.

下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new
功能与比较器件相似
正在供货 118db snr 立体声音频 adc much lower power consumption, 118db snr
正在供货 118db snr 4 通道音频 adc 4 channels, 118db snr
正在供货 具有 pcm 输出的 123db snr 立体声音频 adc 2 channels

技术文档

star =有关此产品的 ti 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 3
类型 标题 下载最新的英语版本 日期
* 数据表 2007年 3月 14日
应用手册 2008年 10月 16日
evm 用户指南 2006年 12月 4日

设计和开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

评估板

— pcm4222 评估模块 (evm)

the pcm4222evm provides a convenient platform for evaluating the performance and functionality of the pcm4222 device. when used in connection with commonly available audio test equipment, the pcm422evm provides a complete environment for evaluating the functionality and performance of the pcm4222 (...)

用户指南:
ti.com 上无现货
支持软件
slac510.zip (485 kb)
模拟工具

pspice-for-ti — 适用于 ti 设计和模拟工具的 pspice®

pspice® for ti 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 cadence® 的模拟分析引擎。pspice for ti 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 pspice for ti 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型和记娱乐手机app的解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。

在 pspice for ti 设计和仿真工具中,您可以搜索 ti (...)
封装 引脚 cad 符号、封装和 3d 模型
48

订购和质量

包含信息:
  • rohs
  • reach
  • 器件标识
  • 引脚镀层/焊球材料
  • msl 等级/回流焊峰值温度
  • mtbf/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息:
  • 制造厂地点
  • 封装厂地点

推荐产品可能包含与 ti 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 ti 工程师和记娱乐手机app的技术支持的 ti e2e™ 论坛

所有内容均由 ti 和社区贡献者按“原样”提供,并不构成 ti 规范。请参阅。

如果您对质量、包装或订购 ti 产品有疑问,请参阅 。​​​​​​​​​​​​​​

视频系列

视频