产品详情

number of series cells 1 charge current (max) (a) 1 vin (max) (v) 18 cell chemistry li-ion/li-polymer, lithium phosphate/lifepo4 battery charge voltage (min) (v) 3.6 battery charge voltage (max) (v) 4.65 absolute max vin (max) (v) 25 control topology linear control interface i2c features bat temp thermistor monitoring (jeita profile), ic thermal regulation, iindpm (input current limit), input ovp, power path, solar input/mppt, vindpm (input voltage threshold to maximize adaptor power) vin (min) (v) 3 rating catalog operating temperature range (°c) -40 to 125
number of series cells 1 charge current (max) (a) 1 vin (max) (v) 18 cell chemistry li-ion/li-polymer, lithium phosphate/lifepo4 battery charge voltage (min) (v) 3.6 battery charge voltage (max) (v) 4.65 absolute max vin (max) (v) 25 control topology linear control interface i2c features bat temp thermistor monitoring (jeita profile), ic thermal regulation, iindpm (input current limit), input ovp, power path, solar input/mppt, vindpm (input voltage threshold to maximize adaptor power) vin (min) (v) 3 rating catalog operating temperature range (°c) -40 to 125
10 4.4 mm² 2.2 x 2
  • 1-a linear battery charger
    • 3.0v to 18v input voltage operating range optimized for battery-to-battery charging and usb adapters
    • 25v tolerant input voltage
    • configurable battery regulation voltage with 0.5% accuracy from 3.6v to 4.65v in 10mv steps
    • li-ion, li-poly, and lifepo4 chemistries support
    • 5ma to 1a configurable fast charge current
    • 115mω battery fet on resistance
    • up to 3.125a discharge current to support high system loads
    • configurable termination current down to 0.5ma
    • configurable ntc charging profile thresholds including jeita support
    • power cycle and advanced reset mechanism
  • power path management for powering the system and charging the battery
    • regulated system voltage (sys) ranging from 4.4v to 4.9v in addition to battery voltage tracking and input pass-though options
    • configurable input current limit
    • usb suspend mode supported
    • battery tracking input voltage dynamic power management (vindpm) for high impedance input sources
    • dynamic power path management optimizes charging from weak adapters
  • ultra low quiescent current
    • 15na shutdown mode
    • 3.2µa ship mode with button press wake
    • 4µa in battery only mode
    • 30µa input adapter iq in sleep mode
  • one push-button wake-up and reset input
  • integrated fault protection
    • input overvoltage protection (vin_ovp)
    • battery undervoltage protection (buvlo)
    • battery short protection (batsc)
    • battery overcurrent protection (batocp)
    • input current limit protection (ilim)
    • thermal regulation (treg) and thermal shutdown (tshut)
    • battery thermal fault protection (ts)
    • watchdog and safety timer fault
  • 1-a linear battery charger
    • 3.0v to 18v input voltage operating range optimized for battery-to-battery charging and usb adapters
    • 25v tolerant input voltage
    • configurable battery regulation voltage with 0.5% accuracy from 3.6v to 4.65v in 10mv steps
    • li-ion, li-poly, and lifepo4 chemistries support
    • 5ma to 1a configurable fast charge current
    • 115mω battery fet on resistance
    • up to 3.125a discharge current to support high system loads
    • configurable termination current down to 0.5ma
    • configurable ntc charging profile thresholds including jeita support
    • power cycle and advanced reset mechanism
  • power path management for powering the system and charging the battery
    • regulated system voltage (sys) ranging from 4.4v to 4.9v in addition to battery voltage tracking and input pass-though options
    • configurable input current limit
    • usb suspend mode supported
    • battery tracking input voltage dynamic power management (vindpm) for high impedance input sources
    • dynamic power path management optimizes charging from weak adapters
  • ultra low quiescent current
    • 15na shutdown mode
    • 3.2µa ship mode with button press wake
    • 4µa in battery only mode
    • 30µa input adapter iq in sleep mode
  • one push-button wake-up and reset input
  • integrated fault protection
    • input overvoltage protection (vin_ovp)
    • battery undervoltage protection (buvlo)
    • battery short protection (batsc)
    • battery overcurrent protection (batocp)
    • input current limit protection (ilim)
    • thermal regulation (treg) and thermal shutdown (tshut)
    • battery thermal fault protection (ts)
    • watchdog and safety timer fault

the bq25186 is a linear battery charger ic focusing on small solution size and low quiescent current for extending battery life. the device is available in a leadless, small package with a thermal pad giving thermal performance. the device can support up to 1a charging and system loads of up to 3.125a.

the battery is charged using a standard li-ion or lifepo4 charge profile with three phases: precharge, constant current and constant voltage. thermal regulation provides the maximum charge current while managing the device temperature. the charger is also optimized for battery to battery charging with 3v minimum input voltage operation and can withstand 25v absolute maximum line transients. the device integrates a single push-button input to reduce the total solution footprint.

the bq25186 is a linear battery charger ic focusing on small solution size and low quiescent current for extending battery life. the device is available in a leadless, small package with a thermal pad giving thermal performance. the device can support up to 1a charging and system loads of up to 3.125a.

the battery is charged using a standard li-ion or lifepo4 charge profile with three phases: precharge, constant current and constant voltage. thermal regulation provides the maximum charge current while managing the device temperature. the charger is also optimized for battery to battery charging with 3v minimum input voltage operation and can withstand 25v absolute maximum line transients. the device integrates a single push-button input to reduce the total solution footprint.

下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 ti 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 2
类型 标题 下载最新的英语版本 日期
* 数据表 | 2024年 5月 6日
evm 用户指南 | 2024年 4月 29日

设计和开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

评估板

— bq25186 评估模块

bq25186evm 是 bq25186 电池充电管理 ic 的评估套件。bq25186 是一款具有电源路径的 i2c 受控型 1a 线性电池充电器,采用具有散热焊盘的小型 qfn 封装。bq25186 集成了工业和个人电子产品应用常用的功能,并通过小和记娱乐手机app的解决方案尺寸提供超低 iq、集成保护功能、可编程性、ts 监控功能和理想的热性能。
用户指南: |
封装 引脚 cad 符号、封装和 3d 模型
10

订购和质量

包含信息:
  • rohs
  • reach
  • 器件标识
  • 引脚镀层/焊球材料
  • msl 等级/回流焊峰值温度
  • mtbf/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息:
  • 制造厂地点
  • 封装厂地点

推荐产品可能包含与 ti 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 ti 工程师和记娱乐手机app的技术支持的 ti e2e™ 论坛

所有内容均由 ti 和社区贡献者按“原样”提供,并不构成 ti 规范。请参阅。

如果您对质量、包装或订购 ti 产品有疑问,请参阅 。​​​​​​​​​​​​​​

视频系列

视频